4WD Mechanix Magazine Home Page 4WD Mechanix Video Network 4WD Mechanix 'Tech and Travel' Forums Illustrated Technical Articles and How-to Site Content Directory Contact Us

Enter your keywords here and click!

Click here for  Access to the Mobile Version  of this Website!                             Click here for direct access to the 4WD Mechanix Magazine Facebook Page!  Join Us at Facebook![NKS_MENU]

Click the4WD Mechanix Video Network button for access to the HD video channel playlists. For a complete list of articles and videos, click the "Site Content Directory" button!

HTP America banner

How-to: Gas Welding Session Six—Running a Gas Welding Bead! 

Part 1 of Session Six: Running a Gas Welding Bead
 
Part 2 of Session Six: Running a Gas Welding Bead
 
(The video can be set and viewed in 1080P quality at full-screen mode—if you have the bandwith!)

Gas welding: the first beads and welds

     In this session, we run welding beads by controlling the molten puddle with the torch and adding filler metal to a puddle. These are the basic steps to gas welding and other welding processes. 

Filling a hole in the sheet metal

     We dip the filler rod into the molten puddle, at the right time, and the weld takes form. For fusing metal, we can even tack weld without the use of filler material (above). See the process unfold in this HD video session!

 View the Part 1 and Part 2 HD videos for insights into running a gas welding bead and using filler metal. The next sessions will go further into gas welding technique and provide practice steps for improving your gas welding skill.

Weld Mold Company Logo